CB Radio Magnet Antenna

JINBO MAGNET MOUNT CB Antenna for Universal Vehicles JBA-230 Specifications : · Works with all Mobile CB Radios · Pre-wired with 10 feet Cable and PL-259 Connector · Center Load Magnet Mount Antenna · 17-7 Stainless Steel Whip Installation Instructions: 1. Don’t remove foil covering on bottom of...

Product Details

JINBO MAGNET MOUNT CB Antenna for Universal Vehicles JBA-230

Specifications:       

· Works with all Mobile CB Radios

· Pre-wired with 10 feet Cable and PL-259 Connector

· Center Load Magnet Mount Antenna

· 17-7 Stainless Steel Whip


Installation Instructions:

1. Don’t remove foil covering on bottom of magnet structure. The foil protects the car finish and makes a good capacitive ground.

2. Locate the antenna on the car roof, over the trunk lid, or any convenient flat area on the vehicle. To obtain equal radiation in all directions in the center of the roof is best.

3. Run the coax cable into the car. It is preferable to route the cable through a window. If routing through a door opening, tape the cable securely to the doorframe using cloth backed tape. Cable will normally not be harmed by opening and closing of car doors or windows. Ensure that the cable is not crushed or deformed.

4. Run the coax to the transceiver and connect the coax plug to the transceiver antenna connector. Do not shorten the coax cable, as it is the proper length set for peek performance.


 图片12.png图片13.png

Hot Tags: CB Radio Magnet Antenna, China, suppliers, manufacturers, factory, made in China
Related Products
Inquiry